Fry's Electronics FR-54RTR

To Next Page

To Previous Page

24FR-54RTR User Manual

Section 3 - Conguration

MTU:

Reconnect

Mode:

MAC

address:

Clone MAC

address:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1400 is

the default MTU.

Select either Always-on, Manual, or Connect-on demand.

The default MAC address will be displayed

The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router. You can use the

Clone MAC Address button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN

MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless

required by your ISP.

Fry's Electronics FR-54RTR - Page 28