Fry's Electronics FR-54RTR - Page 53

49FR-54RTR User Manual
Section 3 - Conguration
Time Settings
Select the Time Zone from the drop-down
menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network
of computers. This eld is optional.
To manually input the time, enter the values
in these elds for the Year, Month, Day, Hour,
Minute, and Second. Click Set Time. You
can also click Copy Your Computer’s Time
Settings.
Time Zone:
Daylight
Saving:
Automatic:
Manual: