Need help?Do you have a question about the Fuji Electric frenic mini series and is the answer not in the manual?
General| Output Frequency | 0.1 to 400 Hz |
|---|---|
| Control Method | V/F control, Sensorless vector control |
| Cooling Method | Fan cooling |
| Model | Frenic Mini series |
| Overload Capacity | 150% for 60 seconds |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheating, Short circuit |
| Communication | RS-485 (Modbus RTU) |
| Ambient Temperature | -10°C to +50°C (non-freezing) |
| Humidity | 95% (non-condensing) |
| Altitude | Up to 1000 m above sea level |
| Input Voltage | 200 to 240 VAC, 380 to 480 VAC |
| Braking Unit | Built-in (optional external for higher power models) |
To Next Page
