2 - 42
14
OMRON PLC • 2
(OMRON-CS1 DNA)
When connect the POD to CS1 on a network, the POD can also
access the other CS1 on a network.
Available PLC
Available Memory
See [Available Memory] of CS1 in [13 OMRON PLC • 1].
Wiring
See [Wiring] in [13 OMRON PLC • 1].
UG00S-CW Setting
Select [System Setting] from [Item], and click [Comm. Parameter]. The [Comm. Parameter]
dialog is displayed. Set [Connection] to [1:n] in the [Detail] tab window.
Select [System Setting] from [Item], and click [Network Table]. [Edit Network Table] is displayed.
Double click the [No.]. The dialog is displayed. Register the CS1 on the network.
14 OMRON PLC • 2
POD
CS1
(1-1)
CS1
(1-3)
(2-1)
CS1
(1-2)
CS1
(2-3)
CS1
(2-2)
CS1
(2-4)
Network No.1
Network No.2
PLC
Link Unit
Wiring Diagram
CS1
CS1W-SCU21
RS-232C [Wiring Diagram 2]
RS-422 [Wiring Diagram 7]
Communication board
(CS1W-SCB41)
CPU unit with a built-in
RS-232C port (host link port)
RS-232C [Wiring Diagram 2]
RS-232C [Wiring Diagram 2]
Select PLC Type
SYSMAC CS1 DNA
* 1
*1 Cannot be connected to POD by multi-link connection.
double click
To Next Page
Loading...
