Fuji Electric UGx20 SERIES - GE Fanuc PLC • 1

2 - 84
GE Fanuc PLC • 1
(90 series)
Available PLC
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
28
Port
19200bps
Odd
8
Baud Rate
Parity
Transmission
Code
Data Length
Stop Bit 1
Function
Response Delay Time
Time-out
ASCII/HEX
Item Setting of PLC
1
19200bps
Odd
8
1
Comm. Parameter of POD
01 ("0" for x 10, "1" for x 1)
Host link system (fixed)
0 (fixed)
None (fixed)
HEX (fixed)
Link Unit
Wiring Diagram
RS-232C [Wiring Diagram 1]
RS-485 [Wiring Diagram 2]
Programmable co-processor
(PCM)
Select PLC Type
90 Series
PLC
Series 90-30
28 GE Fanuc PLC • 1
Memory TYPE Remarks
R(data register) 0
I (input) 1
Q(output) 2