2 - 126
YAMATAKE PLC
48 YAMATAKE PLC
48
Available PLC
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
PLC
MX200/MX50
RS-232C [Wiring Diagram 1]
Select PLC Type
MX Series
Wiring Diagram
9600bps
1
Even
Even
1
Port
Baud Rate
Parity
Data Length
Stop Bit
Item Setting of PLC
9600bps
88
11
Transmission
Code
Comm. Parameter of POD
Memory TYPE Remarks
R(data register) 0
M(auxiliary relay) 1
L (latch relay) 2
X (input relay) 3
Y(output relay) 4
TP (timer/current value) 5
TS (timer/set value) 6
CP (counte/current value) 7
CS (counter/set value) 8
T (timer/contact) 9
C(counter/contact) 10
P (link register) 11
To Next Page
Loading...
