2 - 57
20
YOKOGAWA PLC • 1
(FA-500)
Available PLC
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
Port 1
19200bps
Even
7
Baud Rate
Parity
Transmission
Code
Data Length
Stop Bit 1
Sumcheck
Terminal Character
Item Setting of PLC
1
19200bps
Even
7
1
Protection Function
Comm. Parameter of POD
Provided (fixed)
None (fixed)
None (fixed)
FA500FA500
LC01-0N
PLC
Link Unit
RS-232C [Wiring Diagram 1]
RS-422 [Wiring Diagram 2]
RS-232C [Wiring Diagram 1]
LC02-0N
Select PLC Type
Wiring Diagram
20 YOKOGAWA PLC • 1
Memory TYPE Remarks
D(data register) 0
B (common register) 1
TP (timer/current value) 2
TS (timer/set value) 3
CP (counter/current value) 4
CS (counter/set value) 5
X (input relay) 6
Y(output relay) 7
I(internal relay) 8
E(external relay) 9
To Next Page
Loading...
