Fuji Electric UGx20 SERIES - Yaskawa Plc • 1

2 - 62
YASKAWA PLC • 1
(memobus)
Available PLC
*
Other kinds of MEMOBUS unit can be connected.
Communication Setting
The recommended communication parameter setting of both PLC and POD is as follows:
Select [TYPE 1] or [TYPE 2] from [Trans. Mode] in [Comm. Parameter] of the UG00S-CW.
22
19200bps
Even
1
Baud Rate
Parity
Transmission
Code
Data Length
Stop Bit 1
Port
Error Check
Item Setting of PLC
19200bps
Even
1
Port Delay Timer
1
0 (fixed)
CRC (fixed)
Comm. Parameter of POD
8 (fixed)
PLC Type
Contents
GL60 series, PROGIC-8
Type 1
Same as before
GL120/130 series
Type 2
Standard binary mode
Setting of POD
GL60 series
Memobus port
on a CPU module
PORT2 on a CPU unit
GL120,
GL130 series
PROGIC-8
JAMSC-IF60
JAMSC-IF61
JAMSC-IF611
PLC Link Unit
RS-232C [Wiring Diagram 1]
RS-422 [Wiring Diagram 3]
RS-232C [Wiring Diagram 1]
RS-422 [Wiring Diagram 4]
RS-232C [Wiring Diagram 2]
JAMSC
-120NOM27100
JAMSC-IF612
JAMSC-IF613
Select PLC Type
Memobus
Wiring Diagram
22 YASKAWA PLC • 1