2 - 60
Available Memory
*
The CPU No. is required in addition to the memory type/address. The assigned memory is
indicated while editing the screen as illustrated:
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
(E.g. 1 : D00001)
CPU No.
Memory Type
Address
21 YOKOGAWA PLC • 2
Memory TYPE Remarks
D(data register) 0
R (common register) 1
V (index register) 2
W (link register) 3
Z(special register) 4
TP (down timer current value) 5
TS (timer set value) 6 Read only
CP (down counter current value) 7
CS (down counter set value) 8
X (input relay) 9
Y(output relay) 10
I(internal relay) 11
E (common relay) 12
L (link relay) 13
M (special relay) 14
B (file register) 15
To Next Page
Loading...
