2 - 68
Available Memory
Set the memory to the extent of the memory range of each PLC model.
Use TYPE number to assign indirect memory for macro programs.
Memory TYPE Remarks
D(data register) 0
R (link register) 1
B (file register) 2
N (current value register) 3
X (input relay) 4 WX as word device
Y(output relay) 5 WY as word device
M(internal relay) 6 WM as word device
K (keep relay) 7 WK as word device
L (link relay) 8 WL as word device
T(counter/contact) 9 WT as word device
C(counter/contact) 10 WC as word device
U (extension data register) 11
H (extension set value register) 12
EN (extension current valueregister) 13
EX (extension input relay) 14 WEX as word device
EY (extension output relay) 15 WEY as word device
EM (extension internal relay) 16 WEM as word device
EK (extension keep relay) 17 WEK as word device
EL (extension link relay) 18 WEL as word device
ET (extension counter/contact) 19 WET as word device
EC (extension counter/contact) 20 WEC as word device
V(special register) 21 WV as word device
24 TOYOPUC PLC
To Next Page
Loading...
