1 - 54
17 Operation of POD Main Menu
3. First, BIOS screen is adjusted.
Press the [Adjust] switch in the [Setting 1] box to activate RGB display mode.
With the BIOS screen displayed, adjust with switches [F
•
1] to [F
•
6].
[SYSTEM] End of adjustment
[F
•
1] Vertical: Screen is moved downward.
[F
•
2] Vertical: Screen is moved upward.
[F
•
3] Horizontal: Screen is move rightward.
[F
•
4] Horizontal: Screen is moved leftward.
[F
•
5] Increments dots by +1.
[F
•
6] Decrements dots by
-
1.
*
Adjustment of dots is made so that blurring is minimized.
When adjustment is completed, press the [SYSTEM] switch to return to the [RGB Adjust] screen.
Not used Not used
RGB Adjust
Main Menu
Adjust
Adjust
Clear Save
Setting-1 Setting-2
Horizontal : 31180 Hz Vertical : 59 Hz
Please refer to the manual, "Hardware".
BIOS Screen
ROM PCI/ISA BIOS ( 2A69KA1E )
COMS SETUP UTILITY
AWARD SOFTWARE, INC.
! ! CPU SOFT MENU II ! !
STANDARD CMOS SETUP
BIOS FETUREES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP, PCI & ONBOAD I/O
LOAD SETUP DEFAULTS
LOAD BIOS DEFAULTS
PASSWORD SETTING
IDE HARD DISK DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
Esc : Ouit
F10 : Save & Exit Setup
CPU Name , Type , Speed . . .
: Select Item
( Shift ) F2 : Change Color
ROM PCI/ISA BIOS ( 2A69KA1E )
COMS SETUP UTILITY
AWARD SOFTWARE, INC.
! ! CPU SOFT MENU II ! !
STANDARD CMOS SETUP
BIOS FETUREES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP, PCI & ONBOAD I/O
Esc : Ouit
F10 : Save & Exit Setup
CPU Name , Type , Speed . . .
LOAD SETUP DEFAULTS
LOAD BIOS DEFAULTS
PASSWORD SETTING
IDE HARD DISK DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
( Shift ) F2 : Change Color
To Next Page
Loading...
