Fuji Electric UGx20 SERIES - Page 97

2 - 28
MITSUBISHI PLC • 4
(FX / FX2N / FX1S series CPU)
10
Connection
Connect to the FX series CPU port.
The communication parameter setting of POD is done automatically.
Available PLC
*
When the CPU is updated, or the specifications are changed, there is some possibility that
POD cannot be connected to the PLC.
10 MITSUBISHI PLC • 4
FX1/2
CPU
Select PLC Type
FX series CPU
Wiring Diagram
RS-232C [UG00C-X] made by Fuji Electric
RS-422 [UG200C-M] made by Fuji Electric
or [Wiring Diagram 1]
FX0N (tool port)
FX2N series CPU
FX1N/2N
(tool port)
FX2NC (tool port)
FX1S (tool port)
FX1S series CPU
RS-422 [UG00C-E] made by Fuji Electric
or [Wiring Diagram 2]
or
[UG200C-M] made by Fuji Electric
+ [FX-20P-CADP] made by MITSUBISHI
About the ladder transfer function, refer to Appendix.