About Server Fax
161
Fax
4
Features Unavailable for Sending Server Fax
The following features are available for regular faxes, but are not available for server
faxes.
* When the SMB or FTP protocol is used, the available options are [Standard (200 x 100 dpi)] and [Fine
(200 dpi)], and the resolution of data that is sent to a final destination depends on the resolution setting
on the fax server. When the SMTP protocol is used, the available option is [Fine (200 dpi)] only.
You can specify the following settings of the Server Fax service under [Tools] >
[System Settings] > [Scan Service Settings] > [Scan Defaults]:
z
Background Suppression
z
Lighten/Darken
z
Sharpness
Features Available for Sending Server Fax (When SMTP is Used)
When the SMTP protocol is used, the Server Fax service is compliant with the E-mail
settings configured in the System Administration mode. The following E-mail settings,
however, are not available for the Server Fax service:
z
Read Receipts
z
Reply To
Screen Features
Fax Resolution*
Transmission Options Priority Send
Cover Page
Recipient Print Sets
Remote Folder
F Code
More Options Remote Polling
Store for Polling
On-hook
To Next Page
Loading...
