6 Send from Folder
296
Send from Folder
6
Printing Files in a Folder
You can print selected files in a folder.
1 Select files on the [Folder - File List] screen.
2 Select [Print] or [Batch Print].
Note • When multiple files are selected, [Batch
Print] allows you to print the selected files
as a single file, while [Print] allows you to
print them as separate files.
For information on [Print] and [Batch Print], refer to
"Print" (P.296) and "Batch Print" (P.297).
3 Select any option. Enter the number of print
sets using the numeric keypad, if necessary.
4 Select [Print]
Note • When a file stored by [Store in Remote Folder] of a print driver is printed, the settings
specified on the control panel or CentreWare Internet Services will override the settings
specified on the print driver except the [Pages Per Sheet (N-Up)], [Skip Blank Page], and
[Print Position] settings.
Print
Allows you to set printing.
îš„Paper Supply
Allows you to select paper.
îš„2 Sided Printing
Allows you to set 2-sided printing.
îš„Staple
Allows you to set stapling.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
For examples of the settings of stapling, refer to "When stapling" (P.297)
îš„File Details
Displays the [File Details] screen. Select a file from the list to check its preview image.
To Next Page
Loading...
Need help?
General
