Operations during Scanning
231
Scan
5
4 After the confirmation, select [Close] to close the preview screen.
Changing Scan Settings
You can change scan settings while scanning the document.
1 Select [Next Original].
2 Select [Change Settings].
3 Set [Color Scanning], [Original Type], [Resolution], [Lighten/Darken], [Original
Orientation], [2 Sided Scanning], and [Original size].
The following shows the reference section for each feature.
"Color Scanning (Selecting an Output Color)" (P.239)
"Original Type (Selecting the Document Type)" (P.241)
"Resolution (Specifying a Scanning Resolution)" (P.273)
"Image Options (Adjusting Scan Density and Image Sharpness)" (P.269)
"Original Orientation (Specifying the Orientation of the Loaded Documents)" (P.279)
"2 Sided Scanning (Scanning Both Sides of a Document)" (P.274)
"Original Size (Specifying a Scan Size)" (P.275)
4 Press the <Start> button.
To Next Page
Loading...
