EasyManuals Logo

Fuji Xerox ApeosPort-IV C4430 User Manual

Fuji Xerox ApeosPort-IV C4430
393 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
Fax
4
4 Fax
192
Sending to Folder (Fax Signal Method)
This feature allows you to send a file directly to a folder on the remote machine. The
file can be printed on the remote machine. To use this feature, you need the folder
number and passcode of the remote folder.
Secure Polling (Fax Signal Method)
This feature allows you to retrieve a file from a folder on a remote machine by sending
a polling request from your machine. To use this feature, you need the folder number
and passcode of the remote folder.
The retrieved file is stored in a folder on the machine. When a file is received in a folder,
the <Data> indicator lights up and a Folder Report is printed. The Folder Report lists
the folder number and name.
Important • You cannot use polling to retrieve files from multiple remote folders simultaneously.
Note • The DTMF method is available for Remote Folder. The supported signals are numerals, "∗",
and "#" only.
For information on how to print files received in a folder, refer to "Printing Files in a Folder" (P.296).
Files received in folders can be automatically printed depending on the folder settings. For information
on the folder settings, refer to "Configuring/Starting Job Flow" (P.299).
Depending on the report print settings, a Folder Report may not be printed even after a file is received in
a folder. For information on the Folder Report setting, refer to "5 Tools" > "Common Service Settings"
> "Reports" > "Folder Report" in the Administrator Guide.
Sending to Folder (DTMF Method)
To send a fax to a folder using the DTMF method, you need the folder number of the
remote folder. Two DTMF methods are available: Auto and Manual.
Sending to Folder (Fax Signal Method)
1 Select [Remote Folder].
2 Select [On].
Off
Disables the Remote Folder feature.
On
Enables the Remote Folder feature. Enter a folder number in [Remote Folder Number].
Remote Folder Number
Select the [Remote Folder Number] box, and enter a 3-digit folder number of the
remote machine using the numeric keypad.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-IV C4430 and is the answer not in the manual?

Fuji Xerox ApeosPort-IV C4430 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-IV C4430
CategoryPrinter
LanguageEnglish

Related product manuals