Fax
4
4 Fax
212
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
For information on the setting items to be registered in a primary relay station and a secondary relay
station, refer to the documentations provided with them.
Note • You can specify any machine that supports our DTMF method feature.
îš„Auto Send (Transmitting without picking up the receiver)
1 Select [New Recipients] to display the keyboard on the touch screen and enter in the
following format.
z
Password
A pre-registered 2-digit number
Note • By default, no password is set. For setting a password, contact our Customer Support
Center. If a password is not set, you do not need to enter one.
z
Relay Station ID
The last two digits of the initiating station address number registered at the primary
relay station
z
Address Number
The address number for the secondary relay station registered at the primary relay
station
You can register the above dialing format in an address number to send using the address number. For
information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
2 Select [+ Add] to perform Multiple Relay Broadcast.
îš„Manual Send (Transmitting with picking up the receiver or on-hook)
1 Select the [More Options] tab to display the [More Options] screen.
2 Pick up the telephone receiver, or select [On-
hook (Manual Send/Receive)].
3 Select [Manual Send] from the drop-down
menu.
4 Use the keyboard displayed on the touch screen to enter numbers in the following
format.
To Next Page
Loading...
Need help?
General
