Energy Saver Mode
49
Product Overview
2
z
Setting a document in the document feeder
z
Opening the document cover
When the following device is connected to the machine and a user performs the
following operation, the Low Power mode can be deactivated without pressing the
<Energy Saver> button.
z
Touch the card to IC Card Reader (optional)
Note • If the machine is in the Sleep mode, however, the Sleep mode will not be deactivated by the
operation above. To take full advantage of the feature that deactivate the Low Power mode
without pressing the <Energy Saver> button, it is recommended to set the time to elapse
until the machine enters the Sleep mode long enough. For more information on how to
change the time to elapse until the machine enters the Sleep mode, refer to "1 Before Using
the Machine" > "Energy Saver Mode" > "Changing the Interval for Entering Energy Saver
Mode" in the Administrator Guide.
1 Press the <Energy Saver> button.
<Energy Saver> button
To Next Page
Loading...
