Fuji Xerox DocuPrint CM415 AP Administrator's Guide

14 Problem Solving
484
Problem Solving
14
027-711
[Cause] No S/MIME certificate can be obtained from the received e-mail.
[Remedy] Import the sender's S/MIME certificate to the machine, or ask the sender to send S/
MIME signature mail with an S/MIME certificate attached.
027-712
[Cause] The received S/MIME certificate has expired, or is an unreliable certificate.
[Remedy] Ask the sender to send the e-mail with a valid S/MIME certificate attached.
027-713
[Cause] The received e-mail has been discarded because it may have been altered on its
transmission route.
[Remedy] Inform this error to the sender, and ask the sender to send the e-mail again.
027-714
[Cause] The received e-mail has been discarded because the address in its From field is different
from the mail address in the S/MIME signature mail.
[Remedy] Inform the sender that the mail addresses differ, and ask the sender to send the e-mail
again.
027-715
[Cause] The received S/MIME certificate has not been registered on the machine, or has not
been set for use on the machine.
[Remedy] Import the sender's S/MIME certificate to the machine, or change settings to use the S/
MIME certificate on the machine if the S/MIME certificate has already been registered.
027-716
[Cause] The received S/MIME certificate has been discarded because the certificate was
unreliable.
[Remedy] Ask the sender to send the e-mail with a reliable S/MIME certificate attached.
027-717
[Cause] Unable to obtain SMTP server address for e-mail transmissions from the DNS server.
[Remedy] Check whether the DNS server is set correctly.
027-720
[Cause] Unable to find the server of an application interface destination.
[Remedy] Confirm the DNS server address. Or, check whether the computer on which the
application (ApeosWare Flow Service) is installed has been registered on the DNS server.
027-721
[Cause] An application interface destination does not exist.
[Remedy] Check whether the application linked (ApeosWare Flow Service) is operating correctly.
027-722
[Cause] The jobs timed out during connection with an application interface destination.
[Remedy] Try processing the job flow again.
027-723
[Cause] Authentication at the application interface destination (ApeosWare Flow Service)
failed.
[Remedy] Confirm the user name and password that is used when creating a job flow.
027-724
[Cause] An application interface destination (ApeosWare Flow Service) could not be accessed.
[Remedy] Check whether ApeosWare Flow Service is operating correctly. If it is operating correctly,
confirm the log.
027-725
[Cause] A job operation failed using an application interface.
[Remedy] Check whether the application linked (ApeosWare Flow Service) is operating correctly.
If it is operating correctly, confirm the log. If it is not operating, confirm the network
environment.
027-726
[Cause] The status of the application interface destination (ApeosWare Flow Service) is
unknown.
[Remedy] Check whether ApeosWare Flow Service is operating correctly. If it is operating correctly,
confirm the log.
027-727
[Cause] A parameter is illegal during an application interface.
[Remedy] Try processing the job flow again.
Error Code Cause and Remedy

Fuji Xerox DocuPrint CM415 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM415 AP
Category	All in One Printer
Language	English