Fuji Xerox DocuPrint M215 fw User Manual

217 Copying
 Document Type
You can select the copy image quality.
1 For the DocuPrint M215 fw, load the document(s) face up with top edge in first into the ADF or
place a single document face down on the document glass, and close the document cover.
For the DocuPrint M215 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M215 fw Only)" on page 208
• "Making Copies From the Document Glass" on page 206
2 Press the Copy button.
3 Select Document Type, and then press the button.
4 Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5 If necessary, customize the copy settings including the number of copies, and copy size.
See also:
• "Setting Copy Options" on page 209
6 Press the (Start) button to begin copying.
Text Suitable for documents with text.
Mixed* Suitable for documents with both text and photos.
Photo Suitable for documents with photos.

Fuji Xerox DocuPrint M215 fw Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M215 fw
Category	All in One Printer
Language	English