Fuji Xerox DocuPrint M215 fw - Line Monitor; Ring Tone Volume; Line Type

345 Using the Operator Panel Menus and Keypad
• Auto Ans. TEL/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external telephone
receives an incoming call. The interval can be specified within the range of 0 to 255 seconds. The
default is six seconds.
• Auto Ans. Ans/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after the external answering
machine receives an incoming call. The interval can be specified within the range of 0 to 255 seconds.
The default is 21 seconds.
• Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.
Values:
• Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Ans Select is set to TEL/FAX Mode.
Values:
•Line Type
Purpose:
To select the line type.
Values:
Off Turns off the volume of the line monitor.
Min Sets the volume of the line monitor.
Middle*
Max
Off
Turns off the volume of the ring tone.
Min Sets the volume of the ring tone.
Middle
Max*
PSTN*
Sets the line type to PSTN.
PBX Sets the line type to PBX.