401
Troubleshooting
The envelope is creased after
printing.
Ensure that the envelope is loaded as instructed in "Loading
Envelope in the Multipurpose Feeder (MPF)" on page 163 or
"Loading Envelope in the Priority Sheet Inserter (PSI)" on page 169.
Page breaks in unexpected
places.
Increase the value for
Job Time-Out
in the
System Settings
menu,
that is on the
Printer Maintenance
tab in the Printer Setting Utility.
For the DocuPrint M215 fw, increase the time-out value in the
Protocol Settings
menu on CentreWare Internet Services.
Print media does not stack neatly
in the center output tray.
Turn the print media stack over in the PSI and MPF.
Printer does not duplex pages. Select
Flip on Short Edge
or
Flip on Long Edge
from the
Duplex
menu on the
Paper/Output
tab in the print driver.
Problem Action
To Next Page
Loading...
Need help?
General
