431
Troubleshooting
NOTE:
• As for the following message, which does not include an error code, refer to the table below for the solution.
116-210 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorized dealer.
See also:
• "Online Services" on page 469
116-314
116-323
116-325
116-326
116-335
116-355
116-395
117-331
117-332
117-333
117-334
117-340
117-342
117-343
117-344
117-346
117-348 Retry, and check the report. Turn off the printer, and then on. If this does not solve the
problem, contact the Fuji Xerox local representative office or an authorized dealer.
See also:
• "Online Services" on page 469
117-349 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorized dealer.
See also:
• "Online Services" on page 469
117-350
117-351
117-366
124-333
134-211
191-310 Although the service life of your printer has been over and the printer stopped running,
you can still use the printer by pressing the
Back
button and the button at the same
time. However, continuous use of the printer will degrade the print quality.
See also:
• "Machine Life" on page 357
191-311 The life of your printer has been over and you can no longer use the printer.
Error Message What You Can Do
USB Memory Error
Cannot Mount File System
Remove from USB Port
Remove the USB memory device and check if it is usable. Press the
button to clear the message.
Error Code What You Can Do
To Next Page
Loading...
Need help?
General
