Common Service Settings
127
Tools
5
Default Watermark Effect
Set the default type of text effect for Watermark.
îš„ Off
A text effect is not applied.
îš„ Embossed
When you re-copy a copied document with watermark, the text hidden in the background is
printed as embossed text.
îš„ Outline
When you re-copy a copied document with watermark, the text hidden in the background is
printed as white cutout.
Default Watermark
Set watermark text.
You can select text from [Copy Prohibited], [Copy], [Duplicate], and the strings assigned to
Custom Watermark 1 to 3.
For more information about custom text, refer to "Custom Watermark 1 to 3" (P.128).
Font Size
Set the size of the text to be printed as the Watermark.
You can set the font size from 24 to 80 points in 1 point increments.
Background Pattern
Set the background pattern to embed the text for the Watermark effect.
You can select from eight patterns: [Wave], [Circle], [Stripe], [Chain], [Beam], [Rhombic],
[Sunflower], and [Fan].
Density
Select the text density of the Watermark.
You can select from [Lighten], [Normal], and [Darken].
Watermark/Background Contrast
Set a contrast level for text and background for the Watermark.
You can select a level from 1 to 9. Select a contrast level, referring to the printed samples by
selecting [Print this Sample List].
Force Watermark - Copy
Set whether or not to forcibly use the Watermark feature when copying a document. When
you select [On], the setting of [Watermark] in the [Output Format] screen is fixed to [On] and
you cannot change the setting.
The user control number, machine ID, and date and time are printed.
Note • You can authorize a user to temporarily cancel the force watermark printing. For more information,
refer to "User Roles and Authorization Groups" (P.336).
• The user control number may not be printed depending on the Login mode configuration.
Force Watermark - Client Print
Set whether or not to forcibly use the Watermark feature when printing from a computer.
To Next Page
Loading...
Need help?
General
