System Settings Procedure
95
Tools
5
For more information, refer to "Accounting" (P.235).
Authentication/Security Settings
You can configure the authentication and security settings.
For more information, refer to "Authentication/Security Settings" (P.245).
Step 5 Setting a Feature
1
Select any feature.
Note • Select a submenu from the [Group] list, and then select a feature from the [Features] list.
• Select [ ] or [ ] as required.
2
Select an item to set.
3
After setting the feature, select [Save].
4
Select [Close] repeatedly until the Services Home screen is displayed.
Note • If rebooting the machine is required to enable the new settings, when you select [Close] in the
[Tools] screen, a message may be displayed. Follow the message and reboot the machine. After the
machine reboots, it exits from the System Administration mode, and the <Log In/Out> button is
unlit.
• When you configure settings under [System Settings] or [Setup] and then press the <Services Home>
button, the screen directly goes back to the Services Home screen.
Step 6 Exiting System Administration Mode
1
Press the <Log In/Out> button.
Note • You can also log out by pressing the login information field on the touch screen, and then selecting
[Logout].
• The <Log In/Out> button is unlit when the machine exits from the System Administration mode.
To Next Page
Loading...
Need help?
General
