Passcode Setting for Extended Functions
591
Appendix
15
Passcode Setting for Extended Functions
A passcode is required to use the extended function on the machine.
Available Extended Function and Passcode
Important • It takes a few minutes longer to warm-up the machine after you set the passcode to enable the
extended function.
Following are instructions for enabling the extended function.
1
Press the <Log In/Out> button on the control
panel.
2
Enter the System Administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
3
Select [Tools] on the Services Home screen.
Note • The screen may differ depending on the
model.
4
Select [Maintenance] in [Common Service
Settings] under [System Settings].
Extended Function Passcode
Embedded Plug-ins
*: This function has same features as those of conventional
optional products "Extensible Customization Kit".
CLUGTTEPFCAE@ for ApeosPort
series models
JTXRTPWDRUGO@ for DocuPrint
series models
To Next Page
Loading...
Need help?
General
