To Next Page

To Previous Page

9 Scanner Environment Settings

290

Scanner Environment Settings

For information on how to set an IP address, refer to "Protocol Settings" (P.152).

Select [Close] repeatedly until the [Tools] screen is displayed.

Select [Close].

Note • Rebooting the machine may be required depending on the settings. When a message displayed on

the screen, follow the message and reboot the machine.

Print a configuration report to confirm that the SMB Client port or FTP client is enabled and

that TCP/IP is set up correctly.

For information on how to print a configuration report, refer to "Print Reports" (P.72).

Step 3 Configuration on the Computer

Create a destination folder on your computer.

Using FTP

Create a destination folder on the server where you login and set write rights on the

folder.

Using SMB

Create a shared folder on your computer and set the write rights on the shared folder.

Note • To use SMB on Mac OS X, set [File Sharing] to [On] in the [Service] tab of [Sharing] under [System

Preferences].

Fuji Xerox DocuPrint M465 AP Administrator's Guide

Other manuals for Fuji Xerox DocuPrint M465 AP