5 Tools
186
Tools
5
Fax Defaults
You can set the default settings of the Fax services. When the machine is turned on, or the
machine exits from the Power Saver mode, or when the <Clear All> button is pressed, the
machine resets to the default values specified under this menu. By setting frequently used
features and values as the defaults, you can simplify operations.
For more information on each setting item, refer to "4 Fax" in the User Guide.
Resolution
Set the default value for [Resolution] in the [Fax/Internet Fax] screen and the [Layout
Adjustment] screen.
Original Type
Set the default value for [Original Type] in the [Layout Adjustment] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] in the [Fax/Internet Fax] screen and the [Layout
Adjustment] screen.
Original Size
Set the default value for [Original Size] in the [Fax/Internet Fax] screen and the [Layout
Adjustment] screen.
Preview
Set whether or not to check the checkbox of [Preview] in the First Tab in the initial state.
Skip Blank Pages
Set the default value for [2 Sided Scanning] in the [Fax/Internet Fax] and [Layout
Adjustment] screens to [2 Sided (First Page 1 Sided)].
Note • This feature is for service representative use. For more information, contact our Customer Support
Center.
Starting Rate
Set the default value for [Starting Rate] in the [Fax/Internet Fax Options] screen.
Delay Start - Specific Time
Set the default value for [Specific Time] of [Priority Send/Delay Start] in the [Fax/Internet
Fax Options] screen when [Specific Time] is selected for [Delay Start].
Transmission Header Text
Set the default value for [Transmission Header Text] in the [Fax/Internet Fax Options]
screen.
Confirmation Options
Set the default value for [Confirmation Options] of [Acknowledgement Report] in the [Fax/
Internet Fax Options] screen.
Note • You can select Delivery Receipts or Read Receipts in [Delivery Confirmation Method]. For more
information on the delivery confirmation method, refer to "Delivery Confirmation Method" (P.196).
Delivery Receipts/Read Receipts
Set the default value for [Read Receipts] or [Delivery Receipt] of [Acknowledgement Report]
in the [Fax/Internet Fax Options] screen.