13 Authentication and Accounting Features
358
Authentication and Accounting Features
13
6
Select [
<Available>], and th
en select [Creat
e/Delete]
.
7
Enter a user ID and select [Save].
8
Select [Service Access].
9
Configure the [Service Access] and [Feature Access] settings for each service, and then
select [Save].
For more information on the service access, refer to "Service Access" (P.236).
10
If necessary, select a user role and an authorization group for the user under [User Role],
and then select [Save].
Note • [User Role] is displayed only when [Login Type] is set to [Login to Local Accounts].
For more information on the user role, refer to "User Role" (P.237).
11
Select [Close] repeatedly until the [Tools] screen is displayed.
12
Select [Close].
To Next Page
Loading...
Need help?
General
