Fuji Xerox DocuPrint M465 AP Administrator's Guide

Error Code
483
Problem Solving
14
124-380
124-381
124-382
124-383
124-390
124-391
124-392
124-393
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
125-311
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
127-210
127-211
127-212
[Cause] A communication error occurred between the machine and the Print Server.
[Remedy] Disconnect the print server cable, and then securely insert the cable into the connector.
Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power.
127-213
[Cause] A communication error occurred between the machine and the Print Server.
[Remedy] Update the machine and the Print Server software to the latest versions.
127-220
127-221
[Cause] A communication error occurred between the machine and the Print Server.
[Remedy] Disconnect the print server cable, and then securely insert the cable into the connector.
Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power.
127-310
127-311
127-312
127-313
127-314
127-315
127-320
127-337
127-342
127-353
127-354
127-396
127-398
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
127-399
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, switch off the machine
power again, and then switch on the machine power while pressing the <Start> button
and <Stop> button simultaneously, and hold this condition for 6 seconds. The print data
that caused an error will be deleted automatically, and the machine reboots. If the error
still is not resolved, contact our Customer Support Center.
Error Code Cause and Remedy

Fuji Xerox DocuPrint M465 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M465 AP
Category	All in One Printer
Language	English