3 Maintenance
56
Maintenance
3
*2 : When using the high capacity toner cartridge: Approx. 6,250 pages
Important • When replacing a toner cartridge, toner may spill and soil the floor. We recommend laying paper on
the floor beforehand.
• The use of toner cartridges not recommended by Fuji Xerox may degrade image quality and
performance. Use only toner cartridges recommended by Fuji Xerox.
• When the remaining amount of toner is low, the machine may stop printing and display a message.
If this occurs, replace the toner cartridge to resume copying or printing.
• Replace toner cartridges while the machine is on.
• When the machine is in the Power Saver mode, press the <Power Saver> button on the control panel
to exit the Power Saver mode before replacing toner cartridges.
• Copy or print density may decrease slightly after the message "Please order a Toner Cartridge"
appears on the touch screen.
• If you replace a toner cartridge with a partially used toner cartridge, the number of pages that you
can copy or print after the message "Please order a Toner Cartridge" is displayed may differ
significantly from the values described in the above table.
1
Turn the control panel to the left.
2
Make sure that the machine is not operating,
and open the front cover.
z
Never use a vacuum cleaner for spilled toner and residual toner in this product,
toner cartridge or toner container. It may catch fire by electric sparks inside a
vacuum cleaner and cause explosion. Use a broom or a wet cloth to wipe off the
spills. If you spill a large volume of toner, contact your local Fuji Xerox
representative.
z
Never throw a toner cartridge into an open flame. Remaining toner in the
cartridge may catch fire and cause burn injuries or explosion. If you have a used
toner cartridge no longer needed, contact your local Fuji Xerox representative
for its disposal.
To Next Page
Loading...
Need help?
General
