3 Maintenance
64
Maintenance
3
5
Pull out the Tray 1 halfway until it stops.
6
Hold the tray with both hands, and then
completely pull it out of the machine.
7
Wipe the rollers softly with a cloth moistened
with water.
8
Insert the Tray 1 into the machine, and push it
all the way in until it stops.
Important • Do not put excessive force on the tray. Doing
so could damage the tray or the inside of the
machine.
9
Insert the Tray 5 (Bypass), push it all the way in
until it stops, and close it.
10
Reconnect the power code and cables and turn on the machine.
To Next Page
Loading...
Need help?
General
