FujiFilm instax mini Link 3 - Before Use; Notes on Disposing of the Printer; Part Names; Pairing Your Smartphone and the INSTAX MINI LINK

3
Before Use
Before using the printer, please locate the following accessory
(included at purchase):
Accessory
• USB Type C cable (FZ00013220)
The battery has not been fully charged at the factory. Be sure
to charge the battery before using the printer. The free INSTAX
MINI LINK App will need to be downloaded and paired with
your Smartphone prior to initial use.
Read ‘IMPORTANT SAFETY NOTICE’ (Page 16) for safety
information.
Notes on Disposing of the Printer
A built-in lithium ion battery is located inside this printer�
When you dispose of the printer, follow your local regulations to
ensure proper disposal.
For proper disposal in the United States at product end-of-life,
please contact 1-800-800-3854 Option #1 INSTAX.
For proper disposal in Canada at product end-of-life, please
contact 1-800-461-0416.
For proper disposal in Latin America at product end-of-life, please
contact your local FUJIFLM distributor or dealer for disposal
instructions.
Do not attempt to remove the built-in battery. Injury may result.
Part Names
Before using the printer for the first time, fully charge the
battery.
Front
1
2
7
6
5
4
3
Rear
9
8
1
Power button
2
Function button
3
USB Type C port cover
4
USB Type C port
5
Reset button
*1
6
LED
*2
7
Film ejection slot
8
Film door
*3
9
Film door lock
*
1
If the printer does not work properly, press the Reset button to
reset the printer.
*
2
For details on LED indication status, see pages 4, 5 and 6.
*
3
Printer uses INSTAX MINI instant film only (film sold separately).