13
IMPORTANT SAFETY NOTICE
This product has been designed with safety in mind, and to
provide safe operation when handled correctly and in
accordance with the instructions in this User’s Guide� It is
important that both the product and the INSTAX SQUARE
instant film pack are handled properly and used only to print
photos as instructed in this User’s Guide and in the
INSTAX SQUARE instant film pack instructions� For your ease and
safety, strictly follow the instructions in this User’s Guide� Keep
this User’s Guide in a safe, convenient place for easy future
reference as needed�
WARNING
This symbol indicates danger, which could result in product
damage, injury or death. Follow the instructions indicated to avoid
damage to the printer or injury.
WARNING
If one of the following cases occur, immediately unplug the
USB Type-C cable, turn the printer off and refrain from any
further use of the printer� Call the applicable Fujifilm customer
service center�
• The printer becomes hot, emits smoke, has a burnt smell, or
otherwise seems abnormal.
• The printer is dropped into water, or foreign objects like water,
sand, dirt or metal get inside the printer.
WARNING
The printer has a built-in battery� Do not subject it to heat,
expose it to an open flame, drop it, attempt to remove it, or
otherwise apply impact to it� Doing so may cause the printer to
explode, resulting in injury�
WARNING
Never attempt to take this product apart� You may be injured�
All repairs should be handled solely by Fujifilm� Injury may
result from attempts to self-assess or repair this printer�
If this product is dropped or damaged so that the inside is
showing, do not touch it� Contact Fujifilm’s customer support
team�
Do not touch any parts which are inside the film door� You
may be injured�
Never get this product wet or handle it with wet hands� Doing
so may result in electric shock and injury�
Promptly unplug the USB Type-C cable once battery is fully
charged� Printer will not over-charge�
Keep out of the reach of small children� This product could
cause injury in the hands of a child�
Do not cover or wrap the printer or USB AC power adapter in a
cloth or blanket, or otherwise place the printer in the sun or
an environment where heat may build up� This could distort
the casing or cause a fire�
Printer Care
■ Handling the Printer
• CAUTION - Do not expose to excessive heat such as sunshine,
fire or the like during use, storage or transportation. An
explosion or leakage of flammable liquid or gas could result.
Also, ensure proper disposal in accordance with the instructions
below.
• CAUTION - Do not remove or attempt to remove the lithium
battery. Without limitation, do not expose or attempt to expose
the printer or the lithium battery to fire or a hot oven. Do not
attempt to damage, mechanically crush or cut the lithium
battery, as an explosion could result.
• CAUTION - Do not subject to extremely low air pressure at
high altitude. An explosion or the leakage of flammable liquid
or gas could result.
■ Printer Care
1.
Do not open the film door until you have used up the loaded
INSTAX SQUARE instant film pack� Doing so will expose the
remaining film and the film can no longer be used�
2.
Your printer is a precision instrument. Do not get it wet or drop
it. Also, do not expose it to sand, dust or dirt.
3.
Do not use cleaning products or solvents such as those with
bleach or alcohol to remove dirt. Wipe with a damp cloth if and
as necessary.
4.
Keep the film chamber and printer interior clean to avoid
damaging the film.
5.
In hot weather, do not leave your printer in hot places such as
in a car or on the beach. Do not leave it in damp places or
places where weather exposure could result.
6.
Moth repellent gas such as naphthalene may affect your
printer and photo prints. Store your printer and photo prints in
a place where exposure to harmful cleaning or other
household elements will be avoided.
7.
Note that the temperature range within which your printer can
be used is 41°F to 104°F (5°C to 40°C).
8.
Take great care to ensure that your photo prints do not violate
copyright, image rights, privacy or other personal rights and
do not offend public decency. Actions that violate the rights of
others, that are contrary to public decency, or that constitute a
nuisance may be punishable by law or otherwise legally
actionable.
9.
This printer is designed for personal/household and limited
commercial use. Download the free App to your Smartphone.
■ Charging the Battery
The battery is not charged at shipment. Charge the battery
completely before use.
Charge the battery using the supplied USB Type-C cable and
the USB AC Adapter from your Smartphone. Charging times will
increase at ambient temperatures below 50°F (10°C) or above
95°F (35°C). Do not attempt to charge the battery in
environments with temperatures above 104°F (40°C); at
temperatures below 41°F (5°C), the battery will not charge.
To Next Page
