6
Turning on/off the Printer
Press and hold the Power button for approximately 1 second to
turn the printer on or off.
The LED lights up when the printer is turned on.
If the printer remains idle without operation for 5 minutes, the
printer turns off automatically.
Checking the Printer Status with the LED
You can check the printer status with the LED.
Color LED status Status
Blue Flashing Firmware is being updated
Purple Flashing Reprinting
Yellow Lights up for 3
seconds, then
turns off
Low battery
* If this continues even after
charging, there may be a
malfunction. In such cases,
contact Fujifilm’s customer
support team or a
FUJIFILM authorized
dealer.
Yellow Continuous
flashing
Print error occurred
Please check to make sure
the film ejection slot is not
jammed and the film door is
securely closed.
* If this continues to occur,
contact Fujifilm’s customer
support team or a
FUJIFILM authorized
dealer for assistance.
Connecting Your Smartphone and Printer
Together and Printing
With the functions of the INSTAX SQUARE LINK Smartphone App,
you can edit your favorite Smartphone images before printing by
adding text, applying filters, and much more! See Page 4 on
how to install the INSTAX SQUARE LINK Smartphone App or check
out the following site: https://instax.com/square_link/
When Establishing Connection for the First Time
1
Press and hold the Power button for approximately
1 second to turn the printer on�
The LED lights up.
2
Start the downloaded INSTAX SQUARE LINK
Smartphone App�
To Next Page
Loading...
