EasyManua.ls Logo

FujiFilm IS Pro - Page 89

FujiFilm IS Pro
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
89
Advanced Features — Photography
*7 Available only if non-CPU lens is used without specifying lens data in the [NON-CPU LENS DATA] (p.121) under [
MISC.] in the [SET UP] menu.
*8 Select [1/250(AUTO FP)] for the [FLASH SYNC SPEED] (p.158) under [ FLASH/BKT] in the [SET UP] menu.
Not available if built-in flash fires.
*9 Available only when SB-800 is used as master flash or Nikon SU-800 wireless Speedlight commander is used.
*10Available with AF CPU lenses only.
The following Speedlights can be used in non-TTL auto and manual modes. If they are set to TTL, the shutter button will lock
and no photographs can be taken.
*1 When an SB-27 is mounted on the IS Pro, the flash mode is automatically set to TTL, and the shutter-release will be
disabled. Set the SB-27 to A (non-TTL auto flash).
*2 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, or 200 mm).
CAUTION
Flash attachments made by manufacturers other than Nikon
Use only Nikon Speedlights. Negative voltages or voltages over 250 V applied to the accessory shoe could not only prevent normal
operation, but damage the sync circuitry of the camera or flash.
Continued Q
SB-80DX, SB-28DX, SB-28,
SB-26, SB-25, SB-24
SB-50DX, SB-23, SB-29
*2
,
SB-21B
*2
, SB-29S
*2
SB-30, SB-27
*1
, SB-22S,
SB-22, SB-20, SB-16B, SB-15
A Non-TTL auto
M Manual ✔✔✔
Repeating flash ——
REAR Rear-curtain sync ✔✔✔
Speedlight
Flash mode/feature

Table of Contents

Related product manuals