Preparation for use and operation
Connecting the power adapter
Preparingfor operationPoweradapter
Please refer to the instructions in "Safety inf ormation", Page 3 .
The power cable supplied conforms to the requirements of the country in which
you purchased your notebook. Make sure that the power cable is approved
for u se in the country in which you intend to use it.
The mains adapter ’s power cable must only be c onnected to a main s socket
if the notebook is connected to the ma ins adapter.
Make sure that the rated current of the mains adapter is not higher than that of the
power system to which you connect it (see technical data for the mains adap ter).
1
2
3
► Connect the mains adapter cabl
e (1) to the
DC jack (DC IN ) on the notebook
.
► Plug the power cable (2) into the
mains adapter.
► Plug the power cable (3) into a
mains outlet.
10600790786, edition 1 English - 6
To Next Page
Loading...
Need help?
General
