Downloaded from Projector.com
XP60 Projector
10 - English A26361-K865-Z100-1-5E19
Connecting the projector to the mains voltage
1
1 = Power connector
Ê Firmly insert the socket with the power cable supplied into the power connector (1) on the side
of the projector and check whether the socket is securely connected.
Ê Connect the plug on the power cable supplied into a properly grounded mains outlet.
Ê If necessary, plug the power connector of the connected device into a properly grounded mains
outlet.
Operating the projector
Menu
Keystone
Volume
ON
OFF
LASER
APERTURE
Power
Laser
Menu
Volume
Effect
Computer
Video
Select
Power
Source/
Select
1
2
3
1 = Power indicator
2 = Control panel of the projector
3 = Control panel of the remote control
i
If the projector has power, the power indicator (1) glows orange.
To Next Page
Loading...
Need help?
General