First-time se tup of yo ur d evice
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this pro cedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NO T restart the device unless
you are reque sted to do so!
To make it easier to use yo
ur device for the first time, the ope rating system
is pre-installed on the
hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a W indow s operating system is installed on your device, you will find more
information on t he system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fuji tsu.com/support".
Fujitsu 17
To Next Page
Loading...
Need help?
General