Working with the notebook
Inserting battery
1
2
1
► Position the battery at the edge.
► Insert the battery into the battery compartment until it engages positively (1).
► Slide the release bu tton in the direction of the arrow (2).
► Complete the removal, see chapter "
Finishing componen t removal", Page 56.
Optical drive
Opticaldrive
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER CLASS 1, and must therefore not be opene d.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid tou ching the surfa ce of a data carrier. Only handle data carriers by their edge s.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a dat a carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
Fujitsu 31
To Next Page
Loading...
Need help?
General