Working with the no tebook
Using the power-management features
PowerPowerBattery
The notebook uses less power when the available power-management features are used. You
will then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmen tal pollution reduced. By
choosing the best power options, you can m ake significant savings and
at the same time help protect the en vironment.
When you close the LCD screen, depending on the setting in Windows, the
notebook automatically enters a power saving mode.
We recommend the follow ing settings:
Function On external power On battery p ow er
Turn off monitor After 10 m inutes After 5 minutes
Turn off hard disk(s) After 15 m inutes After 10 m inutes
Energy saving (S3) After 20 m inutes After 15 minutes
Hibernate mode (S
4)
After 1 hour After 30 m inutes
► Select the power ma
nagement functions in your C ontrol Panel.
► Select the Screen Saver in your Control P anel.
or
► Right-click on the desktop. Switch on the screen saver by clicking Personalization –
Change screen saver.
If you need further information a bout an option, you can get help with most
settings by pressing
F1
to op en the Microsoft Help.
When the notebook is in power-saving mode, the following mu st be remembered:
During power saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never turn off your notebook w hile it is in a powe r saving mode. If the built-in battery is
nearly empty, close the open files and do not go into power saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit po wer saving m ode if necessary via the mouse or keyboard or by switching on the
notebook.
► Close all opened programs and completely shut down the notebook.
34 Fujitsu
To Next Page
Loading...
Need help?
General