- 52 -
WALL MOUNTED
ASU30RLE
11) Switching functions for external output terminal
Functions of the external output terminal can be switched. For details, refer to “External input and
output”.
12) Outdoor temperature zone boundary temperature A
Setting required if changing of the outdoor temperature setting for heat pump prohibition zone is re-
quired when heater selection control using outdoor temperature 1 and 2 are performed on the indoor
unit. For details, refer to “External input and output”.
13) Outdoor temperature zone boundary temperature B
Setting required if changing of the outdoor temperature setting for heat pump only zone is required
when heater selection control using outdoor temperature 1 is performed on the indoor unit. For de-
tails, refer to “External input and output”.
14) Fixed operation mode switching
Sets the operation mode to heat pump, heating only, or cooling only.
Function number Setting value Setting description Factory setting
60
00 Operation status ♦
09 Error status
10 Indoor unit fan operation status
12 Set point attainment status
Function number Setting value Setting description Factory setting
66
00 -4.0 °F (-20 °C) ♦
01 -0.4 °F (-18 °C)
02 3.2 °F (-16 °C)
03 6.8 °F (-14 °C)
04 10.4 °F (-12 °C)
05 14.0°F (-10 °C)
06 17.6 °F (-8 °C)
07 21.2 °F (-6 °C)
08 24.8 °F (-4 °C)
Function number Setting value Setting description Factory setting
67
00 42.8 °F (6 °C) ♦
01 14.0 °F (-10 °C)
02 17.6 °F (-8 °C)
03 21.2 °F (-6 °C)
04 24.8 °F (-4 °C)
05 28.4°F (-2 °C)
06 32.0 °F (0 °C)
07 35.6 °F (2 °C)
08 39.2 °F (4 °C)
09 42.8 °F (6 °C)
10 46.4 °F (8 °C)
11 50.0 °F (10 °C)
12 53.6 °F (12 °C)
13 57.2 °F (14 °C)
14 60.8 °F (16 °C)
15 64.4 °F (18 °C)
Function number Setting value Setting description Factory setting
94
00 Heat pump ♦
01 Heating only
02 Cooling only
To Next Page
Loading...
