Operation
Changing the mon itor settings with the butto ns
of the control panel
With the OSD menu not activated, you can make the fo llowing settings directly.
Call up OSD m enu
Activate/deactivate ECO operating mode
Select input signal (digital/analog)
Adjust volume
Adjust brightness
Perform auto-adjustment of the monitor with analog input
ON/OFF switch with power indicator
Select OSD language
After the first switch on and after the monitor has been reset to the factory s ettings,
the selection screen for the language appears:
► Press the
ECO
/ button or the
INPUT
/ button to select the desired language.
► Press the
MENU
/ button to co n firm or the
AUTO
/ button to cancel.
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating m ode
The power consumption of the device can be decrease d by reducing
the brightness of the pictu re.
► Press the
ECO
button t o switch the ECO operating mode on or off.
The mes
sage ECO Mode on or ECO M ode off is displayed.
If the ECO operat ing mode is activated, the following OSD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is sw itched off, the brightness previously set by the user is restore d .
22 Fujitsu
To Next Page
Loading...
