Getting started
1 = Power connector
2 = AU DIO-IN socket
3 = DVI-D connector (DIGITAL)
4 = D-SUB socket (ANALOG)
5 = Security slot for "Kensington Lock"
6 = Holes for fixing swivel arm or w all bracket
► Select the data cable which is suitable for your compu ter.
► Connect o ne of the connectors of the data cable to the D-SUB socket or DVI-D socket of
the m o nitor and secure th e plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only on e signal source is conne cted .
► Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engaged.
► Plug the power cable supplied into th e power connecto r of the monitor.
► Secure the cover over the connections.
A lock (Kensington Lock) ca n be mounted in the s ecurity s lot to protect the m onitor
from theft. A Kensington Lock is not included with the monitor at delivery.
A26361-K1320-Z220-1-761 9, edition 2 11
To Next Page
Loading...
