Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s thanks to slim casing
• optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into the co rners)
• high degree of brightne
ss and good contrast
• maximum resolution of 1920 x 1200
• presentation of u p to 1
6.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal frequen cies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 48 to 76 Hz (absolutely flicker-free)
• digital screen contr
ol with microprocessor for storing 31 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient opera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm or similar accessory
• Plug&Play capability
• digital video
inputs (DVI and DisplayPort) with HDCP
• power management for reducing power consumption when the c omputer is not in use
• Compliance w
ith the recommendations accord ing to TCO 6. 0
• the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operat
ing manual contains important information you require to start up and run your LCD monitor.
Control of t
he LCD monitor requires: a display adapter (screen controller) with a VGA interface, or a
digital di
splay ada pter with a DVI interface, or a v ideo signal source with a DisplayPort interface.
The monito
r processes the data supplied to it by the display adapter. The disp lay adapter or the
associat
ed driver software is responsible for setting the modes (resolution and refresh rate).
When putt
ing the monitor into operation for the first time , the screen display should be
optimal
ly adapted to the display adapter used and a d justed in acco rdance w ith y our
needs (s
ee chapter "
Changing the monitor settings", Page 21).
Target group
You don’t need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this man ual.
In the event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5
To Next Page
Loading...
