Application Unit Application Unit PY: AU47
U41861-J-Z126-4-76 15
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
5. March 2018 Stand 17:30.42 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303919_BA_Additional_update_3\prod_e\ba_addon.k03
Indicators on the operable drives/components
Optical drive activity indicator
Lights up green when the storage medium is accessed.
ServerView Local Service Display
A tray mechanism enables you to pull the ServerView Local Service Display out of the
computer housing to read information. Press the front of the module to release the lock.
You can also swing the ServerView Local Service Display out of its normal position at an
angle of 120°. This makes it easier to read the information when the server is located high
up in the rack.
v CAUTION!
If a fault occurs, please contact Customer Support.
Global error indicator (yellow)
Lights up yellow when a prefailure event was detected which requires
Customer Support to become active (by way of precaution).
Flashes yellow when an error was detected which requires Customer Support
to become active.
Does not light up when no critical event has occurred.
If the event is still acute after a power failure, the indicator is activated after the
restart.
The indicator also lights up in standby mode.
You can obtain detailed information on the error cases displayed from the
System Event Log (SEL), on the ServerView Local Service Display, in the
ServerView Operations Manager or on the web interface of the iRMC.
To Next Page
Loading...
