10 Gb Net Unit extension Net Unit
32 U41861-J-Z126-4-76
Figure 13: Net Unit (ICX 7750-48F) LEDs (front panel)
Explanation:
3.2.4.3 Brocade ICX 7750 rear panel LEDs
The Brocade ICX 7750 has the following LEDs on the rear panel:
● Two Management port status LEDs
● Two stack control path port LEDs
● Expansion module LEDs:
● One Power LED bicolor status LED (green and amber)
● Four bicolor status LEDs (green and amber) for each of the six QSFP+ ports that
indicate the status of the ports in 40 GbE mode and 4x10 GbE breakout mode.
● Power supply LEDs: One status LED on each installed PSU (Power Supply Unit)
● Fan tray LEDs: One status LED on each installed fan tray
The figure 14 shows the LEDs on the rear panel of the Brocade ICX 7750.
1 Upper 1/10 GbE port LEDs
2 Lower 1/10 GbE port LEDs
3 PSU1 and PSU2 status LEDs
(PSU1 corresponds to the right power supply slot on the rear panel and PSU2
corresponds to the left power supply slot, as viewed from the rear)
4 MS and DIAG status LEDs
5 HA and RDNT status LEDs
To Next Page
Loading...
