Fujitsu BS2000 - Magazines; Removing and Replacing a Magazine Using the OCP

Periphery ETERNUS JX40 (S2) disk storage system
U41861-J-Z126-4-76 45
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
5. March 2018 Stand 17:23.46 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303919_BA_Additional_update_3\prod_e\ba_addon.k05
4.1.2 Operating and indicator elements (rear)
You can see the status LEDs of the SAS I/O module and the status LEDs of the power
supply units on the rear side of the ETERNUS JX40 (S2) subsystem.
Status LEDs of the SAS expander unit
Figure 21: Status LEDs on the rear of the device
UNIT ID LED
Ready/Fault LED
Debug(EXP-TTY)
SAS-OUT(Widelink)
SAS-OUT
Link/Fault LED
SAS-IN
Link/Fault LED
SAS-IN(Widelink)
Status/Fault LED AC Inlet
Ejector levers of a power supply unit Ejector levers of a power supply unit