Net Unit 10 Gb Net Unit extension
U41861-J-Z126-4-76 33
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
5. March 2018 Stand 17:30.42 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303919_BA_Additional_update_3\prod_e\ba_addon.k04
Figure 14: Net Unit (ICX 7750-48F) LEDs (rear panel)
Explanation:
3.2.4.4 LED patterns
The following tables describe the Brocade ICX 7750 switch LED patterns.
PSU1 and PSU2 LEDs
1 Management port 10/100 Mbps link/activity LEDs
2 Management port 1000 Mbps link/activity LEDs
3 Upper slot 40 GbE mode link/activity LED or 10 GbE mode lane 1 link/activity LEDs
4 Lower slot 10 GbE mode lanes 2, 3, and 4 link/activity LEDs
5 UP port (left) and DN port (right) link status LEDs
6 Lower slot 40 GbE mode link/activity LED or 10 GbE mode lane 1 link/activity LEDs
7 Lower slot 10 GbE mode lanes 2, 3, and 4 link/activity LEDs
8 Expansion module power LED
LED state Status of hardware Recommended action
Off (no light) System is off or there is no power. Verify the system is on and has
completed booting.
Steady green PSU is on and functioning properly. No action required.
Steady amber PSU is missing power or in a faulty
state.
Verify that the PSU power cord is
connected to a functioning power
source Replace the power supply.
To Next Page
Loading...
