EasyManua.ls Logo

Fujitsu BS2000 - Page 35

Fujitsu BS2000
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Net Unit 10 Gb Net Unit extension
U41861-J-Z126-4-76 35
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
5. March 2018 Stand 17:30.42 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303919_BA_Additional_update_3\prod_e\ba_addon.k04
RDNT LED
Management port left (10/100 Mbps) status LED
Management port right (1000 Mbps) status LED
1/10 GbE SFP+ port LEDs
LED state Status of hardware Recommended action
Off (no light) System does not have redundant
fans or PSUs installed
No action required.
Steady green System is operating in redundant
mode.
No action required.
Steady amber System has redundant fans and
PSUs, but software has disabled
redundant mode.
No action required.
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady amber No traffic being transmitted, but link
is up.
No action required.
Blinking amber There is traffic and packets are
being transmitted or received.
No action required.
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady green No traffic being transmitted, but link
is up.
No action required.
Blinking green There is traffic and packets are
being transmitted or received.
No action required.
LED state Status of hardware Recommended action
Off (no light) Not cabled. No action required.
Steady green Link is up in 10 GbE mode. No action required.
Blinking green There is 10 GbE traffic and packets
are being transmitted or received.
No action required.
Steady amber Link is up in 1 GbE mode. No action required.
Blinking amber There is 1 GbE traffic and packets
are being transmitted or received.
No action required.

Other manuals for Fujitsu BS2000

Related product manuals